The Official Zerynth Documentation
The official Zerynth Integrated Development Environment that runs on your browser, filled with a ton of features
The Zerynth Standard Library
The Virtual Machine headers and source needed for the uplinking process.
The Zerynth Package Manager, a component of the Zerynth Suite that allows to search, download, manage and develop other Zerynth components
Enables the Arduino Due support
Enables the Mikroelektronika Flip & Click Sam3X support.
Support for Mikroelektronika Quail Board
Enables the NodeMCU 2 support
Enables the Particle Core support
Enables the Particle Electron support
Enables the Particle Photon support
Enables the ST Nucleo F401RE support
Enables the Udoo support
DHT22/11 library
This library enable you to calculate the distance in centimeters with HC-SR04 ultrasonic sensor.
10 Segment dimmable led display.
Temp&Hum click carries STÂ’s HTS221 temperature and relative humidity sensor. Its highlight is that it outputs its measurement in a 16-bit resolution and has a high rH sensitivity of 0.004% (although the accuracy range . In comparison, HTU21D click, HDC1000 click and SHT1x click all output a 12-14 bit resolution signal.
Thumbstick click is a high precision input device. It features a dual axis, spring return, pushbutton enabled joystick (similar to the ones used on joypads on popular gaming consoles), and a MCP3204 12-bit A/D converter.
Control Adafruit Bluefruit shields and breakouts to add Bluetooth Smart (BLE) capabilities to your projects.
Driver for the Broadcom 43362 wifi chip
Animator is a simple engine that takes as input a list o values to be reached at certain times and interpolates the data creating a continuous set of samples.
RTTTL is a module to parse and play old style ringtones in the Nokia format via a buzzer.
The DS1307 real-time clock (RTC) is a low-power, full binary-coded decimal (BCD) clock/calendar controllable via I2C protocol. The clock/calendar provides seconds, minutes, hours, day, date, month, and year information. The end of the month date is automatically adjusted for months with fewer than 31 days, including corrections for leap year. The clock operates in either the 24-hour or 12-hour format with AM/PM indicator. The DS1307 has a built-in power-sense circuit that detects power failures and automatically switches to the backup supply. Timekeeping operation continues while the part operates from the backup supply.
The DS18S20 and DS18B20 are digital thermometers that can provide Celsius
temperature measurements. They communicate over a 1-Wire
bus that by definition requires only one data line (and
ground) for communication with a central microprocessor.
In addition, they can derive power directly from the data line ("parasite power"), eliminating the need for
an external power supply.
This library only works together with a DS2482 1-Wire bridge.
The DS2482 is an I2C to 1-Wire bridge device that interfaces directly to standard (100kHz max) or fast (400kHz max) I2C masters to perform bi-directional protocol conversion between the I2C master and any downstream 1-Wire slave devices. Relative to any attached 1-Wire slave device, the DS2482 is a 1-Wire master.
The module contains a class to handle the Melexis MLX90615, an Infra Red thermometer for non contact temperature measurements.
Drivers for Microchip MCW1001A, the companion module to MRF24WB0 for easy wifi integration.
Drivers for Microchip RN2483 LoRa class A modem.
Temperature an Humidity sensor HTS221 from ST Microelectronics.
Driver for the Texas Instrument CC3000 wifi chip
This module enables the use of the Texas Instrument TMP112 termometer
Driver for the Broadcom 43362 wifi chip
[This driver is DEPRECATED and will be removed! Use lib.broadcom.bcm43362 instead]
Driver for the Texas Instrument CC3000 wifi chip
[This driver is DEPRECATED and will be removed! Use lib.texas.cc3000 instead]
The library contains class definitions and methods to capture, decode and send IR (infrared) packets.
This module contains an implementation of the MQTT protocol (client-side).
The Neopixel Library controls Neopixel Led Strips and Led Rings from adafruit, based on WS2812 and compatibles.
The Servo library provides classes and methods to control generic servo motors connected to PWM enabled pins.
The library contains classes for analog and digital sensors, provides methods for handling generic sensors connected to specific pins of a board and provides easily accessible attributes for automatic parameter evaluation during acquisition (e.g. average, max, etc...)
The module contains classes for toishield's sensors.
Furthermore it takes care of multi-board pin compatibility providing generic names for every useful pin on the shield.
The module to enable microcontrollers to talk with the ZerynthApp
